Many bikers are united in saying that the Schwinn bike pump is one of the best pumps you can use on a bike. But do you know how to use it? If not, check our step-by-step guide below as you learn how to use a Schwinn bike pump.
Step 1: Find the P.S.I. label on the Tire
Every tire in your bike always comes with an inflation recommendation: the P.S.I. or Pounds Per Square Inch. Usually, this P.S.I. Recommendation can be found on the side label of the tire. It is essential to pump your tire with the recommended inflation to make your bike run to its full potential.
Also, when you ride in a tire with very low pressure, it can cause a pinch flat. A pinch flat usually happens when the tube gets pinched between the tire and the rim, which will result in your bike having a flat tire.
Step 2: Finding What Type of Valve is in your Tire
In general, there are two types of valves in your bike tire, the Schrader valves, and Presta. Schrader valves are usually used in mountain bikes. It is also being used on most of the car’s tires. Presta valves are commonly used on road bikes.
Make sure to identify what valve you have on the tire before purchasing in tubes for the tire of your bike. Also, please be reminded that high-pressure tires tend to lose a lot of air, so you need to pump your tire at least once a week.
Step 3: Inflating the Tire
The first thing you will need to do during the inflation process is removing the valve cap. You can unscrew the valve on the bike tire you need to inflate. Then, you will need to loosen the lock screw, which is responsible for the air to come and going on the tube. Failing to do so might damage the pump if you are not careful.
After that, the next step is to attach the correct valve stem of the pump to the valve. You can push the head to the valve slowly so that it will fit snugly to the head of the valve. Then, you will need to lock it into place and pump it with the recommended P.S.I. label.
Use the handles on the bike pump while pulling the lever up and down. This action will put the air into the tire tube. You will need to continue putting in some air until you reach the recommended inflation level of the tire.
Remember that your bike tire should be firm enough but should also have little to give. But the most important thing is to put the recommended inflation as stated by the P.S.I. label found on the tire.
Step 4: Removing the Schwinn Bike Pump
The next step is to unlock the lever of the pump for you to remove it from the tire. Once it is unlocked, you can slowly remove the nozzle of the bike pump while returning the valve cap.
Additional Reminders:
When inflating a Schrader valve, do not forget to remove the valve cap before attaching the correct valve stem to the valve. Lock it down before inflating it with the recommended P.S.I. label of the tire.
If you are on the road and you do not have access to a nice Schwinn bike pump, it is recommended to have a small hand pump or a carbon dioxide inflator while you are on the road. These tools are an excellent replacement for the Schwinn bike pump in case you need to inflate a tire while on the road.
Lastly, always remember to pump up your tire at least once a week. This action is to maintain good pressure in your bike tire.
Why Use a Schwinn Bike Pump?
When you have your bike tire properly inflated, it will make the bike ride smooth and easy. This statement is the reason why it is essential to use the right bike pump for your bike tire. The Schwinn bike pumps are highly recommended by a lot of bikers due to their various features and functionalities.
If you are relying on air compressors from gas stations or other methods, it can be very convenient, but they cannot put the right amount of air into your bike tire. On the other hand, the Schwinn bike pump is equipped with a gauge and the valve stem containing the two types of valves.
The Schwinn bike pumps also come in different varieties. There is the Schwinn Pro Pump which is a high-pressure pump that is perfect for high-pressure road bikes. The Schwinn Max pump is a high-volume pump that is perfect for mountain bikes, cruiser bikes, and tubeless tires.
Conclusion
Learning how to use a Schwinn bike pump is essential if you want to put the right amount of inflation to your tire. This bike pump is equipped with a gauge to let you put the right amount of air as recommended. It also comes with a nozzle equipped with two types of valves that will allow you to easily inflate your tire regardless of the type of valve in your tire tube.